10C Pro - Second Mobile Phone Pairing

Second Mobile Phone Pairing - Second Mobile Phone, GPS, and SR10

1. Press and hold the Jog Dial for 5 seconds until the red LED flashes rapidly and you hear a voice prompt, “Intercom pairing”.

2. Within 2 seconds, tap the Phone Button again, then the LED flashes blue rapidly and you will hear a voice prompt, “Second mobile phone pairing”.

3. Search for Bluetooth devices on your mobile phone. Select the Sena 10C Pro in the list of the devices detected on the mobile phone.

4. If your mobile phone asks for a PIN, enter 0000.

Have more questions? Submit a request

0 Comments

Article is closed for comments.