SF2 - Helmet Install

Installing the Main Unit

  • Installing the Clamp Kit to the Main Unit

1. Push and hold the clamp kit’s tab upwards. While pushing the tab, insert the main unit into the clamp kit.

2. Insert the back plate of the clamp kit between the internal padding and external shell on the left side of the helmet.

 

  • Installing the Speakers

1. Peel off each cover of the hook and loop fasteners for the speakers to expose the adhesive surface.

2. Attach the fasteners to the ear pockets inside the helmet, and then attach the speakers to the fasteners.

3. Connect the speaker cable to the speaker connector.

 

Installing the Microphones

  • Using the Wired Boom Microphone

1. Peel off the cover of the hook and loop fastener for the wired boom microphone to expose the adhesive tape.

2. Attach the hook and loop fastener on the inside surface of the left external shell, and then attach the wired boom microphone’s mounting plate to the hook and loop fastener.

3. Align the arrows on the main unit and microphone cables and insert the microphone cable into the microphone connector.

 

 

  • Using the Wired Microphone

1. Peel off the cover of the hook and loop fastener for the wired microphone to expose the adhesive tape. Then, attach the hook and loop fastener on the inside of the helmet’s chin guard.

2. Attach the wired microphone to the hook and loop fastener for the wired microphone.

3. Align the arrows on the main unit and microphone cables and insert the microphone cable into the microphone connector.

 

 

Have more questions? Submit a request

0 Comments

Article is closed for comments.