SRL - Remote Control Pairing

You can remotely control the SRL via Bluetooth using the Remote Control (sold separately). This eliminates the need to take off your hand for button operations. Your SRL and the Remote Control must be paired together before use.

1. Turn on the SRL and the Remote Control.

2. Press the Center Button for 12 seconds to enter the configuration menu. Tap the (-) Button four times and you will hear a voice prompt saying, “Remote control pairing”. Tap the Center Button to enter into Remote Control Pairing mode and the red LED will flash rapidly and you will hear multiple beeps.

3. Enter pairing mode in the Remote Control device. The Bluetooth system will automatically connect with the Remote Control device in pairing mode. You will hear a voice prompt, “Remote control connected” when they are successfully paired.

Have more questions? Submit a request

0 Comments

Article is closed for comments.