Using the Glued Surface Mounting Adapter for the Main Unit
If the clamp kit is not inserted into the helmet firmly, you can use the glued surface mounting adapter.
1. Make sure that the main unit is separated from the clamp kit. If not, push and hold the clamp kit’s tab upwards and remove the main unit from the clamp kit.
2. While pushing the latch at the center of the clamp kit, push the back plate of the clamp kit outwards to remove it.
3. Align the glued surface mounting adapter and the back of the clamp kit and slide the adapter into the clamp kit until you hear a click. Make sure that the glued surface mounting adapter fits the back of the clamp kit’s grooves.