Mobile Phone and GPS Pairing Configuration #1

Mobile Phone pairing for mobile phone.

Second Mobile Phone pairing for a GPS.

 

This configuration allows you to use make phone calls, answer phone calls, and listen to stereo audio, such as music, through your mobile phone. The GPS is only used for listening to GPS directions.

 

Here are the steps for Configuration #1:

1. Pair your mobile phone to the 20S using the Mobile Phone Pairing method. On the 20S, hold down the phone button for 5 seconds until you hear the voice prompt say “phone pairing” and you see the LED flash red and blue rapidly.

2. While the 20S is in Phone Pairing mode, scan for the Sena 20S in the list of Bluetooth devices on your mobile phone and when it appears select it to pair the two devices together.

3. Wait for the devices to pair together.

4. Pair your GPS to the 20S using the Second Mobile Phone Pairing method. On the 20S, hold down the Jog Dial for 6 seconds until you hear the voice prompt say “intercom pairing” and you see the LED flash red rapidly then within 2 seconds press the phone button to hear the voice prompt say “second mobile phone pairing” and you see the LED flash blue rapidly.

5. While the 20S is in Second Mobile Phone Pairing mode, scan for the Sena 20S in the list of Bluetooth devices on your GPS and when it appears select it to pair the two devices together.

 

Have more questions? Submit a request

0 Comments

Article is closed for comments.