SMH10R - Universal Intercom

Universal Intercom Pairing

The SMH10R can be paired with non-Sena Bluetooth headsets for Bluetooth intercom conversation. You can pair the SMH10R with only one non-Sena Bluetooth headset; if you pair with a different non-Sena Bluetooth headset, the previous pairing list will be removed.

1. Turn on the SMH10R and the non-Sena Bluetooth headset you want to pair with.

2. Press and hold the Center Button on the SMH10R for 8 seconds until the blue LED flashes rapidly. You will hear a voice prompt, “Universal Intercom pairing”.

3. Perform the operation required for handsfree pairing on the non-Sena Bluetooth headset (refer to the users’ manual for the headsets you want to use). The SMH10R will automatically pair with a non-Sena Bluetooth headset when each are in pairing mode.

 

Two-way Universal Intercom

You can initiate the Universal Intercom connection with non-Sena Bluetooth headsets using the same intercom connection method as you would between other Sena headsets. You may single tap
the Center Button to begin an intercom conversation with the first intercom friend, double tap with the second intercom friend, and triple tap with the third intercom friend.

Non-Sena Bluetooth headsets may initiate the Universal Intercom connection, activating the voice dialing or using the redialing operation. You may also disconnect the existing connection by
ending a call operation function (refer to the users’ manual of the headsets for voice dialing, redialing, and ending a call).

Have more questions? Submit a request

0 Comments

Article is closed for comments.