Snowtalk - Configuration Menu

Configuration Menu

You can set the configuration of the headset by the voice menu instruction as below.

  1. To enter into voice configuration menu, press and hold either the (L) Button or the (R) Button for 10 seconds until you hear high-tone double beeps. You will also hear a voice prompt saying “Configuration menu”.
  2. Press the (L) Button to navigate through the menus. You will hear voice prompts for each menu items as below.
  3. You can enable or disable the feature or execute the command by tapping the (R) Button.
  4. If none of the buttons is pressed within 10 seconds, the Snowtalk will exit the configuration and goes back to stand-by.
  5. If you want to exit the configuration immediately, press the (L) Button until you hear a voice prompt “Exit configuration”, and tap the (R) Button

The voice prompt for each menu item is as below:

Have more questions? Submit a request

0 Comments

Article is closed for comments.