SPH10H-FM - Media Selective Pairing

A2DP Stereo Music Only

1. Turn on the headset and press the Phone Button for 5 seconds until the LED flashes red and blue alternately and you hear multiple beeps.

2. Within 2 seconds, tap the Jog Dial again, then the LED turns to red flashing and the beeps turn to double mid-tone beeps. You will hear a voice prompt saying “Media selective pairing”.

3. Search for Bluetooth devices on your smartphone. Select the Sena SPH10H-FM in the list of devices detected on your phone.

4. Enter 0000 for the PIN. Some smartphones may not ask for PIN.

Have more questions? Submit a request

0 Comments

Article is closed for comments.