10R - Remote Control

You can remotely control the 10R via Bluetooth using the Handlebar Remote (sold separately). This eliminates the need to take off your hand for button operations. Your 10R and the Handlebar Remote must
be paired together before use.

Pairing with the Handlebar Remote:

1. Turn on the 10R and the Handlebar Remote.

2. Press the Center Button for 10 seconds to enter the configuration menu. Tap the (+) Button until you hear a voice prompt saying, “Remote control pairing”. Press the Center Button to enter into Remote Control Pairing mode and the red LED will flash rapidly and you will hear multiple beeps.

3. On the Handlebar Remote, press the Rear Button for 5 seconds until its LED flashes red and blue. The 10R will automatically perform pairing with the Handlebar Remote in pairing mode. You will hear a voice prompt, “Remote control connected”, when they are successfully connected.

Have more questions? Submit a request

0 Comments

Article is closed for comments.