10C - Helmet Installation

Installing the Main Unit

10C - Using the Clamp Unit

  1. Loosen the two screws on the back plate of the clamp unit with the included allen wrench.
  2. Insert the back plate of the clamp unit between the internal padding and external shell of the left side of the helmet.
  3. Tighten the two screws until the clamp unit is fastened firmly to the helmet.
  4. Open the SD card cover and insert a microSD card (sold separately) into the card slot on the bottom of the main unit to use camera functions.
  5. Attach the main unit to the clamp unit until you hear a click. The main unit is now fastened to the clamp unit.

 

Have more questions? Submit a request

0 Comments

Article is closed for comments.