10C - Speed Dialing

You can quickly make a phone call by using the voice speed dial menu.

  1. To enter into the voice speed dial menu, double tap the Phone Button and you will hear a mid-tone single beep and a voice prompt, “Speed dial”.
  2. Rotate the Jog Dial clockwise or counterclockwise to navigate between the menus. You will hear prompts for each menu item.
  3. Tap the Phone Button to select a voice menu among the followings:

(1) Last number redial

(2) Speed dial 1

(3) Speed dial 2

(4) Speed dial 3

(5) Cancel

  1. After selecting the last number redial menu, you will hear a voice prompt, “Last number redial”. Then, to redial the last phone call number, tap the Phone Button.
  2. To call one of the speed dials, rotate the Jog Dial clockwise or counter clockwise to navigate between the menus until you hear a voice prompt, “Speed dial (#)”. Then, tap the Phone Button.
  3. If you want to exit the speed dial immediately, rotate the Jog Dial until you hear a voice prompt, “Cancel”, and tap the Phone Button or the Jog Dial. If you do not press any button within 15 seconds, the 10C will exit the voice speed dial menu and go back to stand-by mode.

Note:

  1. Make sure that you connect the mobile phone and the headset to use the speed dial function.
  2. You need to assign speed dial numbers before using the speed dial

Assigning Speed Dial

Enter the Configuration Menu

 

  1. To assign a phone number as a speed dial, rotate the Jog Dial until you hear a voice prompt, “Speed dial”.
  2. Tap the Phone Button, and you will hear a voice prompt, “Speed dial one” and “Phone connected”. – Rotate the Jog Dial to select one of three speed dial numbers by hearing voice prompts, “Speed dial (#)”.
  3. Call a phone number you want to assign and you will hear a voice prompt, “Save speed dial (#)”. The phone number is automatically assigned to the selected speed dial number. Then the phone call will hang up immediately.
  4. To exit the menu, rotate the Jog Dial clockwise or counter clockwise until you hear a voice prompt, “Cancel”, and tap the Phone Button to confirm. You will then hear a voice prompt “Cancel”. If any button is not pressed within 1 minute, the 10C will exit the configuration menu and go back to stand-by mode.

 

Have more questions? Submit a request

0 Comments

Article is closed for comments.