10S - Universal Intercom

You can have an intercom conversation with non-Sena Bluetooth
headsets using the Universal Intercom function. Non-Sena Bluetooth
headsets can be connected to the Sena Bluetooth headset if they
support the Bluetooth Hands-Free Profile (HFP). The working distance
may differ depending on the performance of Bluetooth headset that it
is connected to. In general, it is shorter than normal intercom distance
since it uses the Bluetooth Hands-Free Profile. The Universal Intercom
affects both the phone call connection and the multipoint connection
(mostly used for GPS connections for riders). You cannot use a
multipoint connection device while you are using the Universal
Intercom in case as below.

Universal Intercom Pairing

The 10S can be paired with non-Sena Bluetooth headsets for Bluetooth
intercom conversation. You can pair the 10S with only one non-Sena
Bluetooth headset so if you pair with a different non-Sena Bluetooth
headset, the previous pairing will be removed.

1. Turn on the 10S and a non-Sena Bluetooth headset that you want
to pair with.

2. Press the Jog Dial for 10 seconds to enter the configuration menu.
Rotate the Jog Dial until you hear a voice prompt, “Universal
intercom pairing”. Tap the Phone Button to enter into Universal
Intercom Pairing mode and the blue LED will flash rapidly and you
will hear multiple beeps. Please refer to section 14.12, “Universal
Intercom Pairing” for more details.

3. Perform the operation required for handsfree pairing on the nonSena
Bluetooth headset (refer to the User’s Guide for the headsets
you want to use). The 10S will automatically pair with a non-Sena
Bluetooth headset when each are in pairing mode.

Two-way Universal Intercom

You can initiate the Universal Intercom connection with non-Sena
Bluetooth headsets using the same intercom connection method as
you would between other Sena headsets. You may single tap the Jog
Dial to begin an intercom conversation with the first intercom friend,
double tap with the second intercom friend, and triple tap with the
third intercom friend.

Non-Sena Bluetooth headsets may initiate the Universal Intercom
connection, by activating the voice dialer or using the redialing
operation. You may also disconnect the existing connection by using
the operation to end a call (refer to the User’s Guide of the headsets
for voice dialer, redialing, and ending a call).

Have more questions? Submit a request

0 Comments

Article is closed for comments.